Vicon XX123-00-02, Installation & Operation Manual

Page: 15 / 26

XX123-00-02 Rev 203 Network Interface Operation
••
7
Operation
Operating the AurorAcorD Digital Recorder is done through the customized interface, AURC-NIU GUI, shown
below. Refer to the AurorAcorD instruction manual, XX091, for basic operating instructions using the front panel
keyboard.
Double click the Vicon DVR icon on your desktop to launch the GUI. See below.
The following screen will display. (Note: The PC monitor settings must be 1024 x 768 pixels (minimum) and
color setting equivalent to 32 bit for screen image to display correctly.)
Network Considerations
The AurorAcorD Digital Recorder can be used on a 10 or 100 Mbps network. As users are added to the network,
additional bandwidth is used, until eventually the total bandwidth limit is achieved. When the bandwidth limit is
exceeded, the video frame rate will decrease. To optimize overall system performance, use smaller Image Sizes
and reduce the quality level to Low.
The buttons on the bottom of the screen mimic the front panel of the AurorAcorD.