Vicon XX123-00-02, Installation & Operation Manual

Page: 12 / 26

4
••
Installation XX123-00-02 Rev 203 Network Interface
a. Serial Setting: Select the appropriate COM port. See Note on page 6 and Technical Information
for COM port requirements.
b. Connect: When the Connect button is clicked, connectivity is initiated. When connection is
established, the Apply button becomes available and IP Address fields are accessible.
c. IP Setting: Assign and enter a unique IP Address with appropriate Subnet Mask and Gateway
numbers. For a Standalone installation, a valid IP address is 10.0.0.(1-254). The first NIU can
have address 10.0.0.1, the second 10.0.0.2, and so on up to 254. The Subnet Mask is the
same as those of your PC. When installing the AURC-NIU on a corporate network, ask your
network administrator for a unique IP address. (Note: For operation over a WAN/Internet or any
application through a router, a valid static IP address must be used in conjunction with a valid
Gateway address. The unit will not recognize dynamic (DHCP) IP addresses assigned by a
router or server.)
d. Apply: After successfully setting up the IP Setting, click Apply. This installs the previously
entered IP Setting to the connected AURC-NIU. Keep a permanent record of this address.
e. IP Install: If IPInstaller.exe was successfully completed, the following message is displayed:
IP installation is completed
You must restart the server (Note: the server is the AURC-NIU)