Chapter 3 - Installation
For first-time installers, these steps provide the most thorough and accurate instructions.
About This Chapter
This chapter details the complete installation of the VN-301TV5 Single Channel Digital Video Encoder. The
following sections provide information as follows:
Unpacking the Server
defines how to remove the unit and accessories from the box.
Required Items for Installation
defines items needed for installation.
Unit Components
defines all connections on the front panel and their use.
Mounting
defines all methods of securing the server for permanent use.
Installing the VN-301TV5
describes how to install all necessary peripheral devices directly to the server.
Unpacking the Server
Carefully open the carton. Remove the Accessory Kit and the server from the box and place them on a large,
flat working surface. Open the Accessory Kit and verify the contents against the list in Table 1-1.
Required Items for Installation
To properly install the server there must be simple hand tools available such as a screwdriver, wrenches,
pliers and wire cutters/strippers. To setup the server for operation there must be a PC computer running the
ViconNet software (version 5) or a Kollector recorder networked to the server.
4
•
Chapter 3 - Installation
XX159-06-05 Rev 1208 VN-301TV5 Single-Channel Digital Video Server
Summary of Contents for VN-301TV5
Page 2: ......
Page 8: ......
Page 20: ...12 Chapter 4 Operation XX159 06 05 Rev 1208 VN 301TV5 Single Channel Digital Video Server...
