24
|
ViconNet VN-NVR Shadow Installation and Configuration Guide
6. Once the drive has been physically located, press the button to release
the drive arm (handle) and remove it from the bay. Insert a new drive.
7. The “Rebuilding” process begins. The drive icon next the drive that is
rebuilding will look different. This process can take a while (hours). The
unit will beep and can be silenced by right clicking the Intel RAID
Controller at the top left side of the screen and selecting Silence Alarm.
Note
Recording can continue during the Rebuilding process.
8. After the drive is rebuilt, it is strongly recommended the system be
rebooted through ViconNet.
Drive being rebuilt
Summary of Contents for ViconNet VN-NVR Shadow
Page 2: ......
