12
|
ViconNet VN-NVR Shadow Installation and Configuration Guide
Operation
Powering On the Unit
To power on the system:
With the unit set up as shown in
Installation
, press the front panel pushbutton
Power Switch.
Important
Do not press any keyboard buttons at this time.
When the unit completes booting, the Main Screen is displayed.
Powering Off the Unit
To power off the system:
With the unit booted and operational, press the
Shutdown
button in the
Site
Setup
window. Follow the screen prompts and the system returns to the
ViconNet desktop. Use the
Start
button to completely shutdown the system.
OR (this is not recommended, due to the possibility of data loss)
Momentarily press the power switch. The unit switches off.
Final Installation
After the installation is complete, the front cover that protects the drives is
installed. The ears must be left on the unit, as the cover latches on to them.
Using the key(s) provided, turn the latch inside the front cover so that is
hooks onto the rack ear; use the key to lock it in place. Repeat on the other
side.
Summary of Contents for ViconNet VN-NVR Shadow
Page 2: ......
