Model VI-DSP-2 Encoder
Network Setup
6
Encoder Network Setup
To set up the encoder with your network parameters, proceed as follows:
1.
Open a web browser and enter
http://192.168.0.62
. You are now ready to set
up the encoder on your network. A browser window will display.
NOTE
If you received a firmware update from Vicon and wish to upgrade your firmware
version, click Write DSP Flash. Browse for the updated .bin file and click Write
Flash to update. When the process has completed, reset the unit and reload this
web page. See
Resetting the Encoder
in this guide for a description of this
procedure.
2.
Click Network Properties link. The Mango DSP IP Node Configuration
web page displays.
NOTE
If you are unsure of any of the following steps or on a Corporate LAN, please
consult your Network Administrator.
The preferred method is to assign a fixed IP address to the encoder. There is
currently no way to discover the IP address the encoder has received from the
DHCP server.
Summary of Contents for VI-DSP-2
Page 2: ......
