CONNECTING
OTHER EQUIPMENT
V I D E O
OUT
SET IN
SENSOR
V I D E O
IN
I
MIC
V I D E O
O U T
AUDIO IN
MONITOR
The picture vibration can be reduced or eliminated by the following steps.
q
If the vibration occurs in still, slow motion, fast
or normal playback in 24H 960H or OH mode, playback
a tape which is recorded in 2H or 6H mode with this VCR and press the PAUSE button.
If the vibration occurs during normal playback in
and
mode, playback a tape in its playback mode.
q
Press the VERTICAL ADJUST (+) or (-) button to reduce or eliminate the picture vibration.
.
When QUASI V-SYNC is set to “OFF”, the picture vibration is not adjustable with the VERTICAL ADJUST buttons.
Connection with a CCTV monitor (for surveillance) is recommended.
.
Connecting with some monitors may cause picture vibration and/or picture distortion at the top or bottom of the image
during still or normal playback.
A domestic Television Monitor may be unable to provide a stable picture without vibration and distortion.
1 1