background image

 

FCC COMPLIANCE  STATEMENT

 

 

 

 

 

 

 

 

 

 

CE COMPLIANCE  STATEMENT

 

 

 

 

This  device  complies  with  Part  15  of  the  FCC  Rules.  Operation  is  subject 
to the following  two  conditions:  (1) this device may not cause harmful   
interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation. 

 

FCC INFORMATION: 

This equipment has been tested and found to 

comply  with  the  limits  for  a  Class  A  digital  device,  pursuant  to  Part  15  of 
the FCC Rules. These limits are designed to provide reasonable  protection 
against  harmful  interference  when  the  equipment  is  operated  in  a   
commercial environment. This equipment generates, uses, and can radiate 
radio frequency energy and, if not installed and used in accordance with the 
instruction manual, may cause harmful interference to radio communications. 
Operation of this equipment in a residential area is likely to cause harmful   
interference in which case the user will be required to correct the 
interference at his own  expense. 

CAUTION: 

Changes or modifications not expressly approved by the  party 

responsible for compliance could void the 

user’s 

authority to operate  the 

equipment. 

This Class A digital apparatus complies with Canadian ICES-003. 
Cet appareil nume` rique de la classe A est conforme a´  la norme NMB-003 du 
Canada. 

WARNING

 

This is a Class A product. In a domestic environment this product may  cause 
radio interference in  which case the  user may  be required to  take adequate 
measures. 

CAUTION

 

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT  TYPE. 

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. 

Summary of Contents for V980B Series

















Reviews: