10
Network Connection and IP Assignment
The network camera is designed for use on an Ethernet network and requires an IP address for access. Most
networks today have a DHCP server that automatically assigns IP addresses to connected devices. By the factory
default, your camera is set to obtain the IP address automatically via DHCP server. If your network does not have
a DHCP server the camera will us a link local IP, i.e. 169.254.x.x.
If DHCP is enabled and the product cannot be accessed, run the Discovery Tool utility to search for and allocate
an IP address for the camera. The Discovery Tool (IPCConfig.exe) can be found on Vicon’s website,
, on the Software Downloads page for Vicon cameras.
Note: The approved browser for the camera is Internet Explorer*.
Depending on the version of Windows and IE, your screens may be slightly different but similar in function.
Connect the network camera to the network and power up.
Start IPCConfig. The main window displays and the devices connected to the network will display. Right click on
the camera IP to open a browser. A login will display.
(1) Login
Enter user name and password in the pop-up login interface. For first time users, the default admin login is
ADMIN (case sensitive; password: 1234). For increased security, it is recommended to change the password.
After a successful login, a screen will display to change the password; this can be done here or using the
Settings, Users screen. Select Change or No change. If no change is selected you will open the Live camera
interface.
*Supports Internet Explorer 8.0 or above, however, IE 10 or above is required for full functionality, including the file upgrade function.
