V923-N Quick Installation Guide
1. Description
The information in this manual provides quick installation and setup procedures for the V923-N
Camera . This unit should only be installed by a qualified technician using approved materials in
conformance with federal, state, and local codes. Read these instructions thoroughly before beginning
an installation. Always refer to Vicon’s website to assure you have the most up-to-date manual,
The V923-N 3 Megapixel IP Camera is designed for demanding security installations. This network
camera delivers crisp clear images that satisfy any installation need. The V923-N camera is fully
compatible with all ViconNet® systems; its ONVIF certification provides an open-platform for
integration into other video management systems.
The camera is designed for easy installation. PoE eliminates the need for power cables, providing a
cost-effective method of installation; the camera also accepts 12 VDC and 24 VAC. The true day/night
camera includes a removable IR cut filter. A C/CS lens mount is provided, as is an autoiris connector.
The camera also supports two-way audio and alarm relays.
•
Installation Steps
Follow these steps to install the network camera on your local network (LAN):
1.
Check the package contents against the list below.
2.
Connect the network camera.
3.
Set an IP address.
4.
Set the password.
• Package Component
The system comes with the following components:
Camera unit
Installation CD Installation Guide Accessory Kit Optional OSD Controller
Check your package to make sure that you received the complete system, including all components
shown above.
Note:
The optional V920D-OSD OSD Controller can be purchased separately.
• Contents in the installation CD
1.
The V923-N
User’s Manual
2.
The SmartManager User’s Manual
3.
The SmartManager Installation software
2
