background image

X684 Rev 100 V8-80HS-1 Zoom Lenses 

Introduction  

••

  1 

Introduction 

The information in this manual covers the installation, operation and maintenance of the V8-80HS-1 Series of 
High-Speed Motorized Zoom Lenses. These units should be installed by a qualified technician using approved 
materials in conformance with national, state and local electrical codes. Read these instructions through 
completely before attempting installation. 
 
The V8-80M-HS-1 lens features motorized zoom, focus and iris functions. This model is appropriate for indoor 
use. The V8-80MS-HS-1 lens features motorized zoom, focus, and iris and is equipped with a neutral-density 
spot filter to permit use in a wide range of lighting conditions. With this lens, a sensitive camera can operate 
effectively in both partial darkness and high-light-level conditions. The  V8-80MS-HS-P-1 has the same features, 
but it adds preset-position potentiometers to the zoom and focus controls. 
 
The V8-80AC-HS-1 lens has the same features as the V8-80MS-HS-1 plus video-drive autoiris operation. This 
additional feature provides optimum viewing contrast regardless of light conditions or brightness variations within 
the scene. In the AC lens, the iris is controlled by a stepping motor, which is virtually unaffected by vibration or 
operating position. The microcomputer iris control provides precise responsive iris operation. The V8-80AC-HS-
P-1 has the same features, but it adds preset-position potentiometers to the zoom and focus controls. Refer to 
Table 1 for a full list of models. 
 
The preset-position option consists of precision potentiometers built into the lens that provide position feedback 
information for zoom and focus to an appropriate control unit. 
 

Table 1 

V8-80HS-1 Models 

 
Model 

Product Code 

Description 

V8-80M-HS-1 

5863 

Motorized zoom, focus and iris 

V8-80MS-HS-1 

5864 

Motorized zoom, focus and iris; neutral-density spot filter 

V8-80MS-HS-P-1 

5864-01 

Motorized zoom, focus and iris; neutral-density spot filter; preset 
position potentiometers 

V8-80AC-HS-1 

5865 

Motorized zoom, focus; video-drive autoiris; neutral-density spot filter 

V8-80AC-HS-P-1 

5865-01 

Motorized zoom, focus; video-drive autoiris; neutral-density spot filter; 
preset position potentiometers 

 

Summary of Contents for V8-80HS-1 series















Reviews: