background image

 VICON

INSTRUCTIONS FOR
INSTALLATION AND OPERATION

MODEL 

 FIXED MINI DOME

1. INTRODUCTION

The information in this manual covers the installation
and maintenance of the 

 Fixed-Ceiling 

can. Read these instructions through completely before

performing any installation procedures.

This unit should be installed by a qualified technician
using approved materials and wiring practices in accord-
ance with national, state, and local wiring codes.

The 

 Omniscan is designed to accommodate

small monochrome and color solid-state cameras for

installations where discreet surveillance is a necessity.
This unit is designed to be mounted in a drop ceiling,

although it may be installed in other types of ceilings.

A mounting rail option (Model 

 is available

for installations requiring additional support, and a steel

ceiling panel option (Model 

 is available to

replace the existing ceiling tile.

The viewing dome of the 

 is tinted neutral gray

overall, and the interior surface is painted flat black,

except for a narrow viewing strip. The combination of
tinted plastic and the painted interior makes it virtually
impossible to see into the dome. Attached by clips and
nuts, the dome is easily removed to simplify installation
and service.

2. INSTALLATION

2.1 Unpacking and Inspection

 equipment is tested and inspected before leaving

the factory. It is the carrier’s responsibility to deliver the
equipment in the same condition as it left the factory.

2.1.1 INSPECTION FOR VISIBLE DAMAGE

Immediately inspect the cartons upon delivery. Make a
note of any visible damage on all copies of the carrier’s
freight bill.

2.1.2 INSPECTION FOR CONCEALED
DAMAGE

As soon as possible after delivery, unpack the unit and
inspect it for concealed damage. Do not discard the carton
or packing materials. If the unit is damaged, contact the
carrier immediately and request forms for filing a damage
claim. Make arrangements for a representative of the
carrier to inspect the damaged equipment.

Make sure the carrier’s agent (the person making the
delivery) signs the note on all copies of the bill. If the agent
does not have claim forms, contact the carrier’s office.

If the equipment must be returned for repair, follow the
Shipping Instructions at the end of this manual.

WARNING: TO PREVENT RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

Product specifications subject to change without notice.

Vicon part number 8006-8851-00-00

Copyright   1998 Vicon Industries Inc. All rights reserved.

Vicon and its logo are registered trademarks of Vicon Industries Inc.

VICON INDUSTRIES INC. 

89 ARKAY DRIVE, HAUPPAUGE, 

N.Y. 

11788 

TEL: 

 

 

FAX: 

 

TOLL FREE: 

l-800-645-91 16 

UK: 

 

INFOFAX: l-800-287-1207 

WORLD WIDE WEB: 

Summary of Contents for V7FCD








Reviews: