MODEL V732
10
ELECTRICAL
Power Requirements:
Surface Mount:
24 VAC 50/60 Hz,
12 - 16 VDC.
Rack Mount (all):
13.5 - 16 VDC.
Current Requirement:
450 mA.
Power Consumption:
6.0 W.
Heat Equivalent:
0.34 btu/min (0.09 kg-cal/min).
Note: These figures represent the conversion of 100% of the elec-
trical energy to heat. Actual percentage of heat generated will be
less and will vary from product to product. These figures are pro-
vided as an aid in determining the extent of cooling required for an
installation.
Safety Standard:
UL 1950.
Radio Frequency
Emissions Rating:
FCC Class A.
European Community
(CE) Standards:
EN60950.
VIDEO
Number of Channels:
1.
Formats Supported:
Monochrome: EIA and CCIR.
Color: NTSC, PAL and SECAM.
Full System Bandwidth:
6 MHz per channel.
Horizontal Video Resolution:
480 TV lines.
Input/Output Impedance:
75 ohms.
Optimum Input Signal:
1 V p-p nominal composite video.
Output Signal Level:
1 V p-p nominal, composite video,
unity gain, ±5%.
Differential Phase:
0.7º.
Differential Gain:
2%.
Signal-to-Noise Ratio:
>55 dB (0 dB loss).
Interconnection Distance:
Video devices to transmitter:
≤
100 ft (30 m).
Receiver to video devices:
≤
100 ft (30 m).
Note: RG59/U coaxial cable, Belden No. 9259 or equivalent, is
recommended for video interconnection.
TECHNICAL INFORMATION
SHIPPING INSTRUCTIONS
Use the following procedure when returning a unit to the
factory:
1. Call or write Vicon for a Return Authorization (R.A.) at
one of the locations listed below.
Record the name of the Vicon employee who issued
the R.A
.
Vicon Industries Inc.
89 Arkay Drive
Hauppauge, NY 11788
Phone: 631-952-CCTV (2288)
Toll-Free: 1-800-645-9116
Fax: 631-951-CCTV (2288)
For service or returns from countries in Europe,
contact:
Vicon Industries Ltd
Brunel Way
Fareham, PO15 5TX
United Kingdom
Phone: +44 (0) 1489 566300
Fax: +44 (0) 1489 566322
2. Attach a sheet of paper to the unit with the following
information:
a. Name and address of the company returning
the unit.
b. Name of the Vicon employee who issued the
R. A.
c. R. A. number.
d. Brief description of the installation.
e. Complete description of the problem and
circumstances under which it occurs.
f. Unit's original date of purchase, if still under
warranty.
3. Pack the unit carefully. Use the original shipping
carton or its equivalent for maximum protection.
4. Mark the R.A. number on the outside of the
carton on the shipping label.
