background image

18

 

 

Vicon Standard Equipment Warranty 

 

Vicon Industries Inc. (the “Company”) warrants your equipment to be free from defects in material and workmanship 
under Normal Use from the date of original retail purchase for a period of three years, with the following exceptions: 

 

1.  All IQEYE Cameras: Two years if purchased before 1/1/2011. 
2.  Alliance-mini (IQD3xx), Alliance-mx (IQMxxx) and 3 Series (IQ03xx): Five years if purchased between  

1/2/2011 – 12/31/2014. 

3.  Alliance-Pro (IQA3xx): Five years if purchased between 3/2/2012 – 12/31/2014. Three years if the motorized 

lens (IQA3xx-A3) option. 

4.  Access Control System Components: Two year from date of original retail purchase. 
5.  Uninterruptible Power Supplies: Two years from date of original retail purchase. 
6.  VDR-700 Recorder Series: One year from date of original retail purchase. 
7.  V5616MUX: One year from date of original retail purchase. 
8.  Arecont Cameras: One year from date of original retail purchase. 
9.  FMC series fiber-optic media converters and associated accessories: Lifetime warranty. 
10.  For PTZ cameras, “Normal Use” excludes prolonged use of lens and pan-and-tilt motors, gear heads, and gears 

due to continuous use of “autopan” or “tour” modes of operation. Such continuous operation is outside the 
scope of this warranty. 

11.  Any product sold as “special” or not listed in Vicon’s commercial price list: One year from date of original retail 

purchase. 

NOTE: 

 

If the product is to be used outdoors or in dusty, humid, or other hostile environments, it must be suitably 
protected. 

 

Camera products must be protected, whether in use or not, from exposure to direct sunlight or halogen light as 
the light may damage the camera image sensor. This applies to both indoor and outdoor use of the cameras. 

 

For camera products supplied without a lens, extreme care should be used when mounting a lens on these 
products. Damage to the product due to incorrectly mounted lenses will invalidate this limited hardware 
warranty. 

 

Failure to comply with any of the aforementioned requirements will invalidate this Limited Hardware Warranty. 

 

Date of retail purchase is the date original end-user takes possession of the equipment, or, at the sole discretion of the 
Company, the date the equipment first becomes operational by the original end-user. 
 
The sole remedy under this Warranty is that defective equipment be repaired or (at the Company’s option) replaced, at 
Company repair centers, provided the equipment has been authorized for return by the Company, and the return 
shipment is prepaid in accordance with policy. Repaired or replacement hardware will be warranted for the remainder of 
the original Warranty Period or ninety (90) days, whichever is longer. When a product or part is exchanged the 
replacement hardware becomes the property of the original purchaser and all hardware or part thereof that is replaced 
shall become the property of Vicon. 
 
The warranty does not apply (a) to faulty and improper installation, maintenance, service, repair and/or alteration in any 
way that is not contemplated in the documentation for the product or carried out with Vicon consent in writing, operation 
adjustments covered in the operating manual for the product or normal maintenance, (b) to cosmetic damages, (c) if the 
product is modified or tampered with, (d) if the product is damaged by acts of God, misuse, abuse, negligence, accident, 
normal wear and tear and deterioration, improper environmental conditions (including, but not limited to, electrical surges, 
water damage, chemical exposure, an/or heat/cold exposure) or lack of responsible care, (e) if the product has had the 
model or serial number altered, defaced or removed, (f) to consumables (such as storage media or batteries) (g) to 
products that have been purchased “as is” and Vicon the seller or the liquidator expressly disclaim their warranty 
obligation pertaining to the product, (h) to any non-Vicon hardware product or any software (irrespective of packaged or 
sold with Vicon hardware product) and Vicon products purchased from an unauthorized distributor/reseller, (i) to damage 
that occurs in shipment or (j) to damages by any other causes not related to defective design, workmanship and/or 
materials. 
 
The warranty for the products shall run from Vicon to End User customers only (including product purchased through 
authorized partners and resellers). Vicon is not obligated under any circumstances to honor warranties on product(s) 
purchases from internet auction sites including eBay, uBid or from any other unauthorized resellers. Except as explicitly 
provided herein, Vicon disclaims all other warranties, including the implied warranties of fitness for a particular purpose 
and merchantability. 
 
 
 

Software supplied either separately or in hardware is furnished on an “As Is” basis. Vicon does not warrant that 
such software shall be error (bug) free. Software support via telephone, if provided at no cost, may be 
discontinued at any time without notice at Vicon’s sole discretion. Vicon reserves the right to make changes to 
its software in any of its products at any time and without notice. 

 

The Warranty and remedies provided above are exclusive and in lieu of all other express or implied warranties 
including, but not limited to, the implied warranties of merchantability or fitness for a particular purpose. Certain 
jurisdictions do not allow the exclusion of implied warranties. If laws under such jurisdictions apply, then all 
express and implied warranties are limited to the warranty period identified above. Unless provided herein, any 

Summary of Contents for V672-W





















Reviews: