background image

Vicon Standard Equipment Warranty 

 

Vicon Industries Inc. (the “Company”) warrants your equipment to be free from defects in material and 

workmanship under Normal Use from the date of original retail purchase for a period of three years, with the 

following exceptions: 

 

1.  VCRs, all models: Labor and video heads warranted for 120 days from date of original retail 

purchase. All other parts warranted for one year from date of original retail purchase. 

2.  LCD and CRT monitors, all models: One year from date of original retail purchase. 

3.  Uninterruptible Power Supplies: Two years from date of original retail purchase. 

4.  VDR-700 Recorder Series: One year from date of original retail purchase. 

5.  V5616MUX: One year from date of original retail purchase. 

6.  Arecont Cameras: One year from date of original retail purchase. 

7.  FMC series fiber-optic media converters and associated accessories: Lifetime warranty. 

8.  For PTZ cameras, “Normal Use” excludes prolonged use of lens and pan-and-tilt motors, gear 

heads, and gears due to continuous use of “autopan” or “tour” modes of operation. Such 

continuous operation is outside the scope of this warranty. 

9.  Vicon Security Management Systems (SMS) All Models: All hardware is warranted for two years 

from date of original retail purchase. 

10.  Any product sold as “special” or not listed in Vicon’s commercial price list: One year from date of 

original retail purchase. 

 

Date of retail purchase is the date original end-user takes possession of the equipment, or, at the sole 

discretion of the Company, the date the equipment first becomes operational by the original end-user. 

 

The sole remedy under this Warranty is that defective equipment be repaired or (at the Company’s option) 

replaced, at Company repair centers, provided the equipment has been authorized for return by the 

Company, and the return shipment is prepaid in accordance with policy. 

 

The Company will not be obligated to repair or replace equipment showing abuse or damage, or to parts 

which in the judgment of the Company are not defective, or any equipment which may have been tampered 

with, altered, misused, or been subject to unauthorized repair. 

 

Software supplied either separately or in hardware is furnished on an “As Is” basis. Vicon does not 

warrant that such software shall be error (bug) free. Software support via telephone, if provided at 

no cost, may be discontinued at any time without notice at Vicon’s sole discretion. Vicon reserves 

the right to make changes to its software in any of its products at any time and without notice. 

 

This Warranty is in lieu of all other conditions and warranties express or implied as to the Goods, 

including any warranty of merchantability or fitness and the remedy specified in this Warranty is in 

lieu of all other remedies available to the Purchaser. 

 

No one is authorized to assume any liability on behalf of the Company, or impose any obligations on it in 

connection with the sale of any Goods, other than that which is specified above. In no event will the 

Company be liable for indirect, special, incidental, consequential, or other damages, whether arising from 

interrupted equipment operation, loss of data, replacement of equipment or software, costs or repairs 

undertaken by the Purchaser, or other causes. 

 

This warranty applies to all sales made by the Company or its dealers and shall be governed by the laws of 

New York State without regard to its conflict of laws principles. This Warranty shall be enforceable against 

the Company only in the courts located in the State of New York.  

 

The form of this Warranty is effective March 1, 2011.  

 
THE TERMS OF THIS WARRANTY APPLY ONLY TO SALES MADE WHILE THIS WARRANTY IS IN 
EFFECT. THIS WARRANTY SHALL BE OF NO EFFECT IF AT THE TIME OF SALE A DIFFERENT 
WARRANTY IS POSTED ON THE COMPANY’S WEBSITE, 

WWW.VICON-SECURITY.COM

. IN THAT 

EVENT, THE TERMS OF THE POSTED WARRANTY SHALL APPLY EXCLUSIVELY. 
 
 
 
 
 
 
 

Vicon Part Number: 8006-9010-03-09   Rev 0311 

Summary of Contents for V660B-312IR





















Reviews: