S Y S T E M
CPU
Figure 2-l
Sample System Configuration
Front View
2.2 Unpacking and Inspection
All Vicon equipment is tested and inspected before
leaving the factory. It is the carrier’s responsibility to
deliver the equipment in the same condition as it left the
factory.
2.2.2 INSPECTION FOR CONCEALED
DAMAGE
As soon as possible after delivery, unpack the unit and
inspect it for concealed damage. Do not discard the
carton or packing materials. If the unit is damaged,
contact the carrier immediately and request forms for
filing a damage claim. Make arrangements for a
representative of the carrier to inspect the damaged
equipment.
2.2.1 INSPECTION FOR VISIBLE DAMAGE
Immediately inspect the cartons upon delivery. On all
copies of the carrier’s freight bill, make a note of any
visible damage.
Make sure the carrier’s agent (the person making the
delivery) signs the note on all copies of the bill. If the
agent does not have claim forms, contact the carrier’s
office.
If the equipment must be returned for repair, follow the
Shipping Instructions at the end of this manual.
2.3 Installation of Matrix 44 High-Density Card Cage in Rack
The Matrix 44 high-density card cage is shipped from
the factory with all the modules installed and the
addresses set. The card cage is designed for mounting
in a standard
rack (RS-310).
Refer to Appendix A for Matrix 44 card locations and
addressing procedures if additional modules were
dered separately from the card cage or if modules were
removed from the card cage for any reason.
2 - 2
X783-498