A.2 Inserting Cards in the Card Cage
Determine the correct card slot by referring to Figures
guides until resistance is felt. Press firmly until the card
A-l and A-2. The component side of all cards faces to
snaps into the mating connector at the rear of the card
the left. Carefully slide the card into the plastic card
cage.
Shipping Instructions
Use the following procedure when returning a unit
to the factory:
2.
Attach a sheet of paper to the unit with the fol-
lowing information:
1.
Call or write Vicon for a Return Authorization
(R.A.) at one of the locations listed below. Record
the name of the Vicon employee who issued the
R.A.
VICON INDUSTRIES INC.
89 Arkay Drive
Hauppauge, New York 11788
(2288) or toll free l-800-645-91 16
Fax:
(2288)
For service or returns from countries in Europe,
contact
VICON INDUSTRIES (U.K.) LTD
Name and address of the company returning
the unit
Name of the Vicon employee who issued the
R.A.
R.A. number
Brief description of the installation
Complete description of the problem and
circumstances under which it occurs
Unit’s original date of purchase, if still under
warranty
Brunel Way
PO15 5TX
United Kingdom
3.
Pack the unit carefully. Use the original shipping
carton or its equivalent for maximum protection.
4. Mark the R.A. number on the outside of the
carton on the shipping label.
A-6
X783-498