background image

Dear Valued Customer:

Thank you for selecting Vicon systems and products for your video

needs.

Since Vicon's beginning in 1967, our only business has been the

desing, engineering, and producion of the highest quality video

systems and equipment for use in a wide variety of security, safetly,

control, surveillance, and communication appllications.

We stand behind the quality and dependability of every product

with an industry leading Beneficial Use warranty.

If you are not satisfied with a Vicon product or service, I would like

to know.  Your complete satisfaction is the mission of every Vicon

employee.

Sincerely,

Kenneth M. Darby

President

FCC Notice

NOTE: 

Complies with Federal Communications Commission Rules & Regulations

Part 15, Subpart B for a Class A digital device.

WARNING

This equipment generates and uses radio frequency energy and if not installed and
used properly, that is, in strict accordance with the manufacturer’s instruction, may
cause interference to radio and television reception. It has been type tested and
found to comply with the limits for a Class A computing device in accordance with the
specification in subpart B of part 15 of the FCC rules, which are designed to provide
reasonable protection against such interference in a commercial installation. How-
ever, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause interference to radio and television reception, which can
be determined by turning equipment off and on, the user is encouraged to try and
correct the interference by one or more of the following measures:

• Reorient the receiving antenna.
• Relocate the equipment with respect to the receiver.
• Relocate the equipment away from the receiver.
• Plug the equipment into a different electrical outlet so that the equipment and
  receiver are on different branch circuits.

If necessary, the user should consult the dealer or an experienced radio/television
technician for additional suggestions.

The user may find the following booklet prepared by the Federal Communications
Commission helpful:

"Interference Handbook, Bulletin CIB-2"

This booklet is available from the U.S. Government Printing Office, Superintendent of
Documents, Mailstop SSOP, Washington, D.C. 20402-9328, ISBN 0-16-045542-1.

CAUTION:

 This unit contains circuit cards with integrated circuit devices that can

be damaged by static discharge. Take all necessary precautions to prevent static
discharge.

EG-1

(EG)VICONーV3FCD̲1120

03.11.26, 11:37 AM

Page 2

Adobe PageMaker 6.5J/PPC

Summary of Contents for V3FD Series













Reviews: