X523 Rev 998 V20A Pole Mounting Adapter
Introduction
••
1
Introduction
The information in this instruction manual covers the installation of Model V20A Pole Mounting Adapter. This unit
should only be installed by a qualified technician using approved materials in accordance with national, state
and local codes. Read this manual through completely before attempting installation.
The Model V20A Pole Mounting Adapter is a heavy -duty unit that accommodates Vicon’s medium- and heavy -
duty wall mounts for outdoor installation. Compatible mounts are V24WM, V2400WM, V2400AWM, V1600WM,
V2000WM, V7UWM, and V5UWM.
Designed to be installed on a pole with a minimum diameter of 3 inches (7.6 cm) and a maximum diameter of 10
inches (25 cm), the V20A with a wall mount attached can support a complete camera system, including a dome
system or a pan-and-tilt drive and camera housing with camera, up to the load rating of the particular wall mount
being used. Constructed of heavy -duty steel, the pole mounting adapter with an attached wall mount provides a
sturdy installation that is capable of withstanding extreme weather conditions.
