4
••
Installation
X523 Rev 998 V20A Pole Mounting Adapter
each 5/16-18 screws, nuts, lock washers and flat washers. The accessory kit is provided with three strain relief
plugs, two liquid tight fittings, and a compression fitting.
Table 1
Mounting Components
Item No.
Component
Quantity
Function
1
Pole adapter plate
1
Secures wall mount
to pole
2
Pole mount bracket
2
Secures pole adapter
plate to pole
3
18-inch chain
2
Secures pole adapter
assembly to pole
4
24-inch chain
2
Secures pole adapter
assembly to pole
5
Hex-head bolt
(5/16-18 x 2-1/2)
2
Secures pole
adapter/chain
assembly to pole
6
Tension nut
2
Secures item 5
7
Tension bracket
2
Secures item 5
8
5/16-18 x 1 screw
8 (6 used)
Secures item 2 to 1
9
5/16-18 nut
8 (6 used)
Secures item 8
10
5/16 lock washer
8 (6 used)
Secures item 8
11
Flat washer
8 (6 used)
Secures item 8
12
Strain relief plugs
3
Plugs unused cable
entries
13
Liquid-tight fitting
(large)
1
Seals cable access
14
Liquid-tight fitting
(small)
2
Seals cable access
15
Chain link
2
Allows lengthening of
chain
Bracket-to-Plate Installation
1. Assemble the two (2) adapter brackets to each side of the pole adapter plate using the screws, nuts, lock
washers and flat washers provided (3 on each side). Refer to Figure 1 and Table 1.
Note:
Specific installation circumstances may dictate whether the required wall mount should be installed before
or after the pole adapter is in place on the pole.
2. If it is appropriate at this time, mount the selected wall mount to the pole adapter plate. Refer to the
instruction manual for the particular wall mount for installation instructions.
