Vicon V1101C, Installation And Operation Manual, Page: 9 / 18

X458 Rev 700 V1101C Introduction
••
1
Introduction
The information in this manual covers the installation, operation and maintenance of the V1101C System 10
Multifunction Control. This unit should only be installed by a qualified technician using approved materials in
accordance with national, state and local codes. Read these instructions through completely before attempting
installation.
The V1101C is a multifunction unit that controls pan-and-tilt drives, lens functions and housing accessories. The
unit features the P&TPAD™ multiposition front panel disc for manual control of pan-and-tilt functions and an
autopan control switch for automatic operation. Operating controls, including zoom, focus, iris and speed,
comprise the manual lens drive functions. The V1101C also controls wiper, washer and camera power functions.
See Figure 1.
The V1101C is available in 120 VAC and 230 VAC input versions.
Figure 1
Front and Rear Panels