Quick Operation Guide
|
7
Position 5 – Unused (set to OFF)
Position 6 - Unused (set to OFF)
Position 7 – Set password. OFF = Default Position. ON = Reset to
default password (
password
); must be reset to OFF after reboot
and before next power up.
Position 8 – System Mode. OFF = Default Position, ViconNet
Mode. ON = ONVIF/NTCIP Mode.
The main board is located underneath the housing. It may be necessary
to spin the housing mechanism to see the DIP switch, located near the tilt
motor along edge of the board.
DIP Switch Location on Main Board
Communication Ports
If using NTCIP protocol, communicate to the Surveyor HD using ports
3000/UDP or 3001/TCP.
If using ONVIF, use port 8000.
