Quick Operation Guide
|
11
A user name and password are required to log on to the camera dome.
The
Add/Edit
screen allows user accounts to be setup. A maximum
number of 10 users can be entered.
The
Settings
area allows for configuration of a variety of controls,
including Transmission, Image, Analytics (for future release), Date/Time,
Network and Port, Alarms/Relay, Schedule, PTZ and SD Card.
•
The
Transmission
screen provides settings of two streams of
video; configure compression type, resolution, frame rate (fps),
rate control (CBR/VBR), bit rate, force I frame and quality (future
release).
•
The
Image
screen provides settings for white balance, image
freeze, AGC max limit, shutter speed, iris control, iris average
level, iris peak level, and wide dynamic range (WDR); the
Advanced screen also provides settings for red and blue gain
value, backlight control (BLC) tuning, horizontal and vertical
aperture settings, auto night mode and night mode color and lens
speed (the advanced screen should only be used by technically
knowledgeable users).
•
The
Date/Time
screen allows programming and review of the
date and time component of the camera dome. The date and time
can be set manually or to sync with the PC or SNTP server. Date
and time format is selected and automatic daylight saving time is
available.
•
The
Network and Port
screen provides settings for Network,
SMTP, FTP, RTSP, and SNTP. Consult your IT department as
needed.
•
The
Alarms/Relay
screen allows review and programming of
alarms. The Enable Alarms box on the top left of the screen must
be checked to enable any alarms. An Ethernet loss alarm is
available, as are 4 external alarm inputs. The relay driver is also
configured from this screen.
•
From the
Schedule
screen, a schedule of events for time of day
and day of week can be set up.
•
From the
PTZ
screen, there are tabs to set up
Presets
,
Tours
,
Auto Tours
,
Privacy Masks
(future use),
Sectors
,
Titling
, and
Motor Control
.
•
The
SD
Card
screen (future use) provides the parameters for
setting up how data from the dome can be saved to an SD card.
•
The
Maintenance
screen provides a list of configuration controls.
Log capability is for future use. Camera Maintenance provides the
ability to upgrade firmware. Use the Backup button to backup the
configuration. Firmware and configuration data can be restored
using the Restore button. For ViconNet, enter a Nucleus name
