EXPOSURE
EXPOSURE
SHUTTER AUTO
BRIGHTNESS 50
AGC ----
D-WDR OFF
IRIS ADJ F1.6
END
The EXPOSURE menu is used to set the automatic light control method for the camera.
It provides the ability to adjust the shutter speed, brightness, AGC, dynamic range and
iris functions of the camera.
(Xtended Dynamic Range)
1) SHUTTER
Select the shutter mode.(Auto,1/60(50), FLK~ 1/100,000 sec)
Can be changed while in shutter mode.
2) BRIGHTNESS
Adjust BRIGHTNESS level (0 ~ 255)
Can be adjusted while in DC/ manual lens mode.
3) AGC
Auto gain control (OFF / LOW / MIDDLE / HIGH)
4) DWDR
Digital Wide dynamic range
OFF / ON
5) IRIS ADJ
Select the IRIS Open.(F1.6~F32)
►
EXPOSURE
WHITE BAL
BACKLIGHT
DAY NIGHT
DPC
SPECIAL
RESET
SAVE&END
END
ATW2
AUTO
WHITE BAL
<WHITE BAL MANUAL MODE>
WHITE BAL MANUAL
COLOR TEMP OUTDOOR
BLUE ------------
RED
------------
END
►
The screen color can be adjusted by using the WHITE BALANCE function.
It compensates for deviations in the white color caused by changes in the color temperature
of the light source so that the colors are reproduced correctly.
o
o
1) ATW1
Set the color temperature 2500 K 10000 K
than ATW2.
Range is narrower than ATW2 but compensates better
o
o
2) ATW2
Set the color temperature 2000 K 13000 K
Range is wider than ATW1 but does not compensate as well as ATW1.
3) AWC -> SET
Press the ENTER button while the camera is directed at a piece of
white paper to obtain the optimum state under current illumination.
If the environment or light source changes you will have to reset the
white balance.
4)
MANUAL
Manual mode. User can change R and B gain manually.
►
EXPOSURE
WHITE BAL
BACKLIGHT
DAY NIGHT
DPC
SPECIAL
RESET
SAVE&END
END
ATW2
AUTO
9
Summary of Contents for Series 234-00-02
Page 23: ......
