Important Safeguards
GRAPHIC SYMBOL EXPLANATION
13. Outdoor Cable Grounding -
Use only grounded outdoor
cables to protect against voltage surges and static charges.
Section 810 of the National Electrical Code, ANSI/NFPA 70-
1984, provides information on proper grounding of the lead-in
wire to an antenna discharge unit, size of grounding conductors
and the requirements of grounding electrodes.
The lightening bolt symbol alerts the user to the presence of
dangerous voltage that may present the risk of electric shock.
14. Lightning -
Disconnect the product from its power source
and cable system when possible to prevent damage due to
lightning and power-line surges.
15. Power Lines -
Do not locate outside cables over power or
utility lines where they can fall and make direct contact. Contact
with power lines can be fatal.
16. Overloading -
Do not overload wall outlets and extension
cords to prevent risk of fire and electric shock.
The exclamation point symbol alerts the user to the presence of
important operating and maintenance instructions.
17. Object and Liquid Entry -
Never probe through, or spill liquid
into, enclosure openings to prevent risk of fire or electric shock.
1. Read Instructions -
Read all safety and operating instructions
before the product is operated.
18. Servicing -
Refer all servicing to qualified service personnel.
9. Damage Requiring Service -
Obtain service when:
b)
c)
r outdoor use and has been
d)
ubleshooting only to avoid unit damage and personal
The product shows a significant change in performance.
r an approved equivalent to prevent unit damage and
ormed
to avoid component damage during installation and
to serve as the disconnect device, follow the
uidelines below:
a)
device must be incorporated into the
b)
let must be installed
near the unit and be easily accessible.
1
2. Retain Instructions -
Retain all safety and operating
instructions for future reference.
a) The power-supply cord or plug is damaged.
Objects have fallen or liquid has been spilled into the
3. Heed Warnings -
Pay attention to all product warnings.
4. Follow Instructions -
Follow all operating instructions.
product.
The product is not designed fo
5. Cleaning -(Do not use caustic, abrasive or aerosol
cleaners)
exposed to water or moisture.
The product does not operate per the operating instructions.
Perform Vicon recommended adjustments, modifications
and tro
a) For units that CAN BE DISCONNECTED from the power
source, use a damp cloth for cleaning.
injury.
b) For
units that CANNOT BE DISCONNECTED from the
power source, use a damp cloth for cleaning and do not
allow moisture or liquids to enter vents.
e) The product has been dropped.
f)
20. Replacement Parts -
Use only Vicon specified replacement
parts o
6. Attachments -
Use only Vicon recommended attachments to
prevent unit damage and personal injury.
7. Water and Moisture -
Use only products designed for outdoor
environments where they will be exposed to water or moisture.
injury.
21. Safety Check -
Request safety checks to be perf
8. Accessories -
Do not place the unit on an unstable surface to
avoid falling. Use only Vicon recommended mounting accessories..
following repair or maintenance to verify proper operation.
22. ESD Precaution -
Take all normal electrostatic discharge
precautions
9. Ventilation -
Do not block ventilating slots and openings as
they ensure reliable operation. Do not place the unit near a heat
source or into an enclosure unless recommended by Vicon.
operation.
23. For 230 VAC Devices-
When the disconnect device is not
incorporated in the equipment or when the plug on the power
supply is intended
10. Power Sources -
The product should only be operated from
the recommended power source. If not specified, consult your
Vicon dealer or local power company.
g
11. Grounding -
Only products equipped with a 3-prong
grounded plug should be inserted into a grounded power outlet.
Contact an electrician to replace an obsolete outlet. Do not force
a plug into a non-grounded outlet.
For permanently connected 230 VAC units, a readily
accessible disconnect
site wiring.
For 230 VAC units with a plug, the out
12. Power Cord Protection -
Power supply cords should not be
routed in trafficked areas or in tight spaces where they will be
pinched or used to bear weight. Allow some slack in the cord
where it enters the unit.
ii
•
Important Safeguards
XX151-01-00 Rev 605 Surveyor4A Fixed-Position Camera Dome
Summary of Contents for S4AFF-CHA
Page 2: ......
