manualshive.com logo in svg

Vicon Origin, Setup And Maintenance Manual

Share
Download
Vicon Origin Setup And Maintenance Manual Download Page 36

Origin 
Setup & 
Maintenance 
Guide 

Vicon Motion Systems Ltd.

11-Oct-2018

Page 36 of

 

44

Correct disposal of batteries in this device 

(Applicable in the European Union and other European countries with 

separate battery systems)

The use of the symbol as a marking on the battery, 
manual or packaging indicates that the battery in this 
device should not be disposed of with other household 
waste at the end of their working life. Where marked, the 
chemical symbols Hg, Cd or Pb indicate that the battery 
contains mercury, cadmium or lead above the reference 
levels in EC Directive 2006/66. If batteries are not 
properly disposed of, these substances can cause harm to 
human health or the environment.

To protect natural resources, and to promote material reuse, please 

separate batteries form other types of waste and recycle them through 

your local, free battery return system.

The rechargeable battery incorporated in this device is not user 

replaceable. For information on its replacement please contact Vicon 

Motion Systems Ltd.

DRAFT

Summary of Contents for Origin













































Reviews:

No comments

Brands by name

Popular brands

Load more brands