Origin
Setup &
Maintenance
Guide
Vicon Motion Systems Ltd.
11-Oct-2018
Page 18 of
44
Unpair a cluster
You can unpair a cluster from a Beacon within Evoke if it is currently
connected. To do this:
1. Ensure that the current Beacon is not in pairing mode at this point, or
the cluster may reconnect to it.
2. On the System
tab, right-click the cluster and from the context menu,
choose the Unpair option.
The cluster pairing channel is cleared, so it immediately enters pairing
mode to search for a new Beacon.
• The Beacon clears its record of the cluster.
• The cluster entry is cleared from the
System tab.
If the cluster is not connected to a Beacon, you can unpair it using the
multi-function button on the cluster. To do this:
1. Hold the power button for 4 seconds
(TBC)
then release.
The cluster reboots and starts a flash sequence to indicate that it can
be unpaired for 10 seconds.
2. Press the button twice to unpair the cluster.
It automatically returns to pairing mode, searching for Beacons in
pairing mode.
DRAFT
