Page 6 of 8
March 2018
8
Vicon Lock+
Quick Start
Guide
Regulatory information
The following regulatory, safety, and
warranty information is relevant to your
use of Lock+.
❙
❙
❙
For information on how to contact
Vicon, see
Conformity information
Federal Communications
Commission (FCC) Part 15
information for United States of
America customers
This equipment has been
tested and found to comply
with the limits for a Class A
digital device, pursuant to
Part 15 of the FCC Rules
(CFR 47:Part 15:B:2013). These limits
are designed to provide reasonable
protection against harmful interference
when the equipment is operated in a
commercial environment. This
equipment generates, uses, and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instruction manual, may cause
harmful interference to radio
communications. Operation of this
equipment in a residential area is likely
to cause harmful interference, in which
case the user will be required to correct
the interference at his own expense.
Properly shielded and grounded cables
and connectors must be used in order to
meet FCC emission limits. Vicon Motion
Systems Ltd is not responsible for any
radio or television interference caused
by using other than recommended
cables and connectors or by
unauthorized changes or modifications
to this equipment. Unauthorized
changes or modifications could void the
user's authority to operate the
equipment.
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
Canadian Interference-Causing
Equipment Regulations for
Canadian customers
Conformity to the Canadian
Interference-Causing Equipment
Regulations
This Class A digital apparatus meets the
requirements of the Canadian
Interference-Causing Equipment
Regulations ICES-003:2004.
Avis de conformité à la
réglementation d'Industrie Canada
Cet appareil numérique de la classe A
respecte toutes les exigences du
Règlement sur le matériel brouilleur du
Canada ICES-003:2004.
RoHS and RoHS2 information
for European Union customers
Restriction of the Use of certain
Hazardous Substances in Electrical
and Electronic Equipment – RoHS
and Recast (RoHS 2)
This equipment is fully RoHS (2002/95/
EC provides that new electrical and
electronic equipment put on the market
for the first time from 1 July 2006) and
RoHS 2-compliant. The European Union
Directive 2011/65/EU provides that new
electrical and electronic equipment put
on the market for the first time from 3rd
January 2014 shall not contain more
than permitted levels of lead, cadmium,
mercury, hexavalent chromium,
polybrominated biphenyls (PBB), or
polybrominated diphenyl ethers
(PBDE;PentaBDE, OctaBDE; DecaBDE),
Mercury (Hg).
REACH Declaration of Conformity
Vicon Motion Systems Ltd is a
manufacturer of electronic hardware.
We are therefore considered a
“downstream user” as far as the REACH
document is concerned. Vicon Motion
Systems Ltd is therefore not obligated to
register with the European Agency for
Chemicals ‘ECHA’.
Products sold by Vicon Motion Systems
Ltd are “articles” as defined in REACH
(Article 3 Definitions). Moreover and
under normal and reasonably
foreseeable circumstances of
application, the articles supplied shall
not release any substance. For that
reason, Vicon Motion Systems Ltd is
neither obligatory for registration nor for
the creation of material safety data
sheets.
To assure our customers of the
continual supply of reliable and safe
products, we ensure that our suppliers
fulfill all requirements regarding
chemical substances and prepared
materials.
