Rear Panel Controls and Connections
The following picture shows the Kollector Network Server rear panel. Each panel component is described
below.
Figure 3-2: Rear Panel Layout
The Kollector Network Server's rear panel contains the following components:
•
Power Switch:
Used to power on and off the power supply of the recorder.
•
Video Input Ports:
Used to input analog video using the provided looping cable.
•
Sensor Inputs:
S1-S4. Used for relay input (NO or NC dry contact type).
•
Power Receptacle:
Used to connect the provided Power Cable.
•
Keyboard Port:
A mini-DIN type connector used to connect a standard PC keyboard (not included).
•
Mouse Port:
A mini-DIN type connector used to connect the provided optical mouse.
•
USB Connectors:
Used for optional devices.
•
RS-232 Serial Port:
Used for PTZ control with the provided RS-422 converter.
•
Network Port:
A standard RJ-45 connector used to connect to a LAN/WAN (10/100 Base T).
NOTE:
Connector locations may vary according to KN type.
6
•
Installation
XX155-01-00 Rev 1105 Kollector Network Server
