background image

Chapter 1 
Introduction 

The information in this manual covers the installation and operation of the Kollector Network Server 
16-channel Digital Video Server. This system should only be installed by a qualified technician using common 
hand tools and approved materials in accordance with national, state and local wiring codes.  

The Kollector Network Server (KN) is a 16-channel digital video server powered by a software platform called 
ViconNet. This platform allows each KN server to record and transmit video to other Kollector Elite recorders 
and ViconNet workstations over the network. These powerful units also have internal hard drivers for local 
storage.  

ViconNet software is the application that manages all Kollector Elite and Pro recorders, workstations and 
servers.  

ViconNet utilizes two different video compression methods, selectable based on the application's 
requirements. 

• 

Normal: 

Optimized MPEG4; a proprietary compression algorithm developed by Vicon that produces 

outstanding video quality and extended recording durations. 

• 

Full:

 JPEG; standard full-frame compression for use in situations that cannot use a motion compensation 

compression. 

ViconNet uses an MD5 type video authentication algorithm. MD5 is a standard authentication that is based on 
a 128-bit message used to verify data integrity. 

Kollector Network Server has a recording rate based on system settings, video scene content and selected 
hard drive size. 

Kollector Network Server includes a fully integrated GUI for system configuration. KN does not support live 
view or playback video display on a SVGA monitor. The toolbar provides the functions of scheduling and 
macros, report generation, setup, and user logout and shutdown. The Site and Device tree allows a user to 
view and activate locally connected cameras and PTZ cameras. 

Kollector Network Server is housed in an industrial-hardened case with all connections made from the back 
panel. It has a universal power supply that can accept 110 – 240 VAC. 

Vicon requires the use of uninterruptible power supply systems (UPS) to prevent voltage fluctuations that can 
affect operation, cause video loss and cause damage to the equipment. Failure to comply voids the warranty. 

 

NOTE:

 Read all instructions before beginning the installation. 

XX155-01-00 Rev 1105 Kollector Network Server 

Introduction  

  1 

Summary of Contents for Kollector KN XX155-00-00
































Reviews: