12
Host Settings
Use the Host Setting screen to configure camera network information.
Enter the
Host Name
(camera name) and desired menu
Language
from the drop down list. Vicon
recommends that AutoDetect be selected for the
WAN Port
. Set the
HTTP Port
to the desired port; Vicon
recommends keeping the default port 80. Be sure to click
button with each change.
Date Settings
Set the time and date using the Date Setting screen. Unlike ViconNet cameras, I-ONYX megapixel cameras
do not synchronize time with the Nucleus. These must be set manually or synchronized to an external
network time server.
This screen allows you to synchronize the time and date with a network time server (if this option is selected,
verify that the ViconNet Nucleus is also in sync with the same server). Select
SNTP/NTP Server
to
synchronize. If you do not want to synchronize with a network time server, select
Set Manually
and enter the
date and time. Select the correct
Time Zone
. Turn
Daylight Saving
time on (check box) or off; if on, select a
date style (type) and enter the start and end dates for daylight saving time. Click
button after
settings are complete.
XX194-10-04 Rev 110 MP-955IR Megapixel Camera
