2
Installation
2.1
Installation
The dome camera is for use in surface or pendant mounting applications, and the mounting
member must be capable of supporting loads of up to 10 lb (4.5 kg). (Pendant mounting
must use pendant mount accessory.)
The dome cameras mounting bracket should be attached to a structural object, such as hard
wood, wall stud or ceiling rafter that supports the weight of the dome camera.
CAUTION:
A silicone rubber sealant must be applied to seal the housing to secure water-
proofing.
2.1.1
Locking Dome Camera
1. Make screw holes on the ceiling using the supplied mounting Template Sheet (Figure A).
2. Fix the Mounting Bracket to the ceiling using supplied Anchors (4x) and Mounting Screws (4x)
(Figure B).
3. Hook up the Safety Lanyard to the Safety Lanyard Hook of the Mounting Bracket (Figure C).
4. Align the locking tab on the bracket and the locking slot on the base of the dome (Figure D).
5. Turn the dome to the counterclockwise about 10 degree to the locked position (Figure E).
8
Summary of Contents for Cruiser SN663V-A
Page 98: ......
