Vicon Aurora 99 V800KBD, Instruction Manual

Page: 25 / 33

12
•
Installation X939 Rev 1298 Remote Keyboard
5. Set poles 4 through 6 as shown in Table 8.
Table 8
Keyboard DIP Switch Settings for Poles 4-6
Master Keyboard in
systems with a
maximum of 4
keyboards*
Master Keyboard in
systems with more
than 4 keyboards*
Keyboards 1-7
Pole 4 OFF ON ON
Pole 5 ON ON ON
Pole 6 OFF OFF OFF
*Including master keyboard.
Configuring the Multi-Output Interface Units
1. Referring to Figure 9, locate the 4-pole DIP switch on the multi-output interface units.
SW1 SW3
SW4 SW2
LD1
TB5
TB6
TB1
1
1
1
1
1
1
TB2
TB3
TB4
LD2
PIN-1: CHANNEL 1 OUT
PIN-2: CHANNEL 1 IN
PIN-3: GROUND
TB1
PIN-1: CHANNEL 2 OUT
PIN-2: CHANNEL 2 IN
PIN-3: GROUND
TB2
PIN-1: CHANNEL 3 OUT
PIN-2: CHANNEL 3 IN
PIN-3: GROUND
TB3
PIN-1: CHANNEL 4 OUT
PIN-2: CHANNEL 4 IN
PIN-3: GROUND
TB4
PIN-1: GROUND
PIN-2: RS485COMMSB
PIN-3: RS485COMMSA
TB5
PIN-1: SUPPLY GROUND
PIN-2: SUPPLY GROUND
PIN-3: +12V SUPPLY
TB6
Figure 9
Multi-Output Interface Unit Circuit Board
2. Set the 4-pole DIP switch on each multi-output interface unit as shown in Table 9. Pole 2 controls the
communications monitoring of the unit and Vicon recommends that this pole should always be set to ON.