manualshive.com logo in svg

Vicon Andex 714 T Evo, Operating Manual

Share
Download
Vicon Andex 714 T Evo Operating Manual Download Page 62

Preparations on the field

62

Adjusting the height 

and direction of 

travel

Adjust the height and direction of travel as follows on the additional 
swath former:

Loosen and remove the bolts.

Adjust the height and direction of travel of the additional swath 
former.

Tighten and secure in the new position using bolts.

The illustration shows the "Single swath" work position with the 
additional swath former. Proceed as follows when using the additional 
swath former: 

•

Insert the additional swath former into the transport holder or 

•

Pull the additional swath former out by a maximum of 600 mm and 
fasten to the rearmost hole pattern.

Bolts

Risk of collision on swath former

When swathing in the single swath position, move the swath 
former forward in the direction of travel and screw in place. 
Otherwise, the swath former can be damaged.

Risk of collision

Maximum 600 mm

Summary of Contents for Andex 714 T Evo





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands