Crate packaging
25
Gear box
Fitting the gear box
Observe the correct direction of rotation when fitting the T-gear box.
The design of the protective pots decides the installation position:
•
The round protective pot points forwards (in relation to the direction
of travel) to the intermediate shaft support.
•
The oval protective pot points to the right (in relation to the direction
of travel) to the auxiliary drive shaft support.
Use a brush to grease all the PTO stub shafts.
Fit the first T-gear box with protective pots to the transmission
console. When doing so, fit the spacers from above using bolts.
No.
Quantity
Part
1
1
T-gear box with protective pots
2
4
M 12 x 40 bolts, coated
3
2
Spacers
4
4
Washer
T-gear box
Bolts
Spacers
