H.264 16-Channel Encoder Installation and Configuration Guide
|
25
Network Bonding Mode
– Disable or enable the network bonding feature,
allowing both Ethernet ports redundant functionality
VMD and Museum Search
– Disable or enable the processing of VMD
(Video Motion Detection) and museum search metadata.
Note:
If disabled, the encoder processing is improved, however ViconNet will not
be able to perform VMD or museum search on video from this encoder.
Debug Level
– Use for debug purposes only as directed by Vicon
Technical Support
Idle FPS
– Sets up the fps encoded when no stream is used by ViconNet
Note:
If using the encoder with a non-ViconNet VMS, set to desired fps for RTSP
stream.
Telnet Support
– Disable or enable connecting to the encoder via Telnet
Streaming Function options
– Select the network streaming function
used. Choose from TCP, UDP, multicast/ASM or multicast/SSM.
TCP
– TCP stream (unicast)
UDP - UDP stream (unicast); default
Multicast/ASM
– Any-Source-Multicast stream; compatible with
most multicast enabled network (traditional method).
Multicast/SSM
– Source-Specific-Multicast stream; compatible
with SSM enabled network (an advanced method that requires network
specific capabilities).
