H.264 16-Channel Encoder Installation and Configuration Guide
|
17
Groups and Users Restrictions
ViconNet allows creating Multiple Groups and Users in order to limit the
rights to different levels. For more information on how to create Users and
Groups, refer to the latest revision of ViconNet manual XX113.
Configuring the Network Settings
Note:
Before starting, make sure that VNSetup is installed (version 3.71) on the
configuring PC\Workstation. This is available from the Vicon website product
page.
There are two ways to change the IP encoder network settings:
Activating the H264-16CH-ENCDR for the first time: via VNSetup
application.
Connecting the H264-16CH-ENCDR to an active Nucleus: via
ViconNet application (using same Nucleus the H264-16CH-ENCDR is
configured for is necessary).
Note:
In order to install firmware, the PC and H264-16CH-ENCDR must be on the
same IP network subnet.
