SUPERNOVA 10K Digital
7.7 Set pin
You can select your own individual pin
number, which gives you the chance to
lock the remote control against
unauthorised access. Factory setting is
1111.
7.5.1 P-Bus auto PM
This is the P-Bus automatical Power Mode.
It is a special function which was
implemented to use the projector e.g. in
combination with a filmprojector in a
cinema. As soon as the SUPERNOVA 10K
Digital receives a P-Bus comand the unit
will turn on and execute this comand. To
turn it off it needs to receive an “off”-
comand.
7.5.2 P-Bus snap
Stumpfl remote controls offers an auxiliary
function. Here at the P-Bus snap it can be
addressed to work as a snap feature.
7.8 Ext. Cont.
Extended control. Here you can blanket
the following commands:
- power
- focus
- zoom
- slides
When those commands are blanket they
cannot executed externally. It is a
protection mode against accidental use.
Just think about an important presentation
and the operator presses accidently the
wrong button - in the worst case the
projector would turn of or the picture
would be out of focus.
Software manual 1.7
