6
DASHBOARD OPERATION
1.
Power Switch: S1-C(without NFC): Long press to power on; S1-C Pro(with NFC):
short press to power on, then the scooter information will be displayed on the
dashboard. Drive after unlocking the scooter by using NFC card, otherwise you
cannot drive the scooter. Long press to power off.
2.
Mode Selection: 3 driving modes are available, which respectively are ECO mode
(enegry-saving), D mode (Standard), and S mode (Sports). Single click to switch
the mode.
3.
Speedometer: Indicates the current speed. Also displays error codes when faults
are detected.
4. LED Lighting: Double-click to turn on.
5. Bluetooth: A solid Bluetooth icon indicates that the vehicle is connected to a mobile
device. You can view the vehicle status after connecting to the APP via Bluetooth.
6. NFC (optional function): When the NFC card is close to the display panel, the NFC
logo on the panel will light up, and the buzzer will beep to indicate successful
unlocking.
7. Over-temperature Display: If the internal temperature of the controller and motor
is too high during the operation of the vehicle, the panel will promptly display an
over-temperature alarm.
8.
Failure Alarm: When the controller fails, the alarm symbol will light up to warn.
9. Left and right turn signals: the left turn signal lights up when turning left, and so is
the right side.*All S1-C Pro models
10. Power display: when the power is more than 85%, the display is full, and it will
gradually go out as the power drops.
