Vibration Research Corporation VibrationVIEW, Manual

Page: 196 / 333

VibrationVIEW Help 183
© 1995-2005 Vibration Research Corporation. All rights reserved.
test and the conditions under which a data file will be automatically stored.
You can save the data automatically at the end of a level (as defined on the " Schedule " tab), at the
end of a test, at a regular pulse interval and/or all pulses that are outside of the tolerance lines. Check
the appropriate boxes to activate the automatic data store function(s). Check "Prompt for Run Name
when starting the test" to display a
prompt dialog box allowing the operator to enter a new directory
each time the test is started.
You can also enter three lines that will appear in the Data Bottom portion of a graph. Editing a graph's
settings and checking the "Data at Bottom" check box in the
Shock Graph Settings dialog box
enables this display.
All data is saved as time stamped files that can be viewed at a later time by selecting the
File..Open Data menu command.
4.4.7 Import tab
Shock Define Import tab
Clicking the "Import" tab on the Test..Edit Test Settings dialog box accesses this dialog box.
173
285
265
84
110