Vibration Research Corporation VibrationVIEW, Manual

Page: 278 / 333

VibrationVIEW Help 265
© 1995-2005 Vibration Research Corporation. All rights reserved.
graphs. You can also define the type of axis, either logarithmic or linear.
In the Graph Traces selection area, you can define which traces you want to be displayed on your
graphs. To display only the active lines, check the "Show only active lines" checkbox.
You can create Black-and-White or Color graphs using the Style drop-down list.
If you purchased more than one control loop, you will be able to define which control loop you want to
display.
Special graph type "Text Window" can be used to add additional space for text above or below the
graphs. To make a version 4 type "Text at Bottom" press the "Insert Graph" button to add another
graph to the bottom, then set the newly inserted graph type to "Text Window".
Tip: The 'Graph Legends' fields can also include report parameter fields so you can include specific
test values in these fields. For example, you can use the setting "Started at [PARAM:StartTime]" to
insert the time the test was started. See '
Random report parameter names ' for a full list of
parameter fields that can be used here.
9.4.2 Random Graph
Random Graph
Select the Graph..Edit Graph menu command to change the settings of this graph.
9.5 Shock Dialog Boxes
9.5.1 Shock Graph Settings dialog box
Shock Graph Settings dialog box
In Shock test mode selecting Graph..New Graph ,or Graph..Edit Graph Settings menu
command or clicking the "EditGraph" toolbar button displays this dialog box.
70
117
116 117