13
FULL BODY VIBRATION | SUPER VIBE 2000 USER MANUAL
Maintenance
A periodic check of your vibration machine will help keep your machine in good operating
condition and may also help prevent potential problems in the future. The following is
recommended:
•
Always unplug the power cord from the electrical outlet before cleaning, performing
any kind of maintenance, and when the machine is not in use.
•
Tighten all screws every few months.
•
Adjust the feet if the machine is not level.
•
Do not use harsh chemical cleaners, solvents, or any fl ammable liquids to clean the
machine.
•
Wipe the platform and support handles with a clean cloth after each use to prevent
perspiration from entering the machine.
•
After each use, turn off the power switch located on the base unit and unplug the
power cord from the electrical outlet.
Do not store the machine under these conditions:
•
Near heat or open fl ame
•
Under direct sunlight
•
In a humid environment
If the machine is not in use for long periods of time, cover it with a clean soft cloth.
Also, do not twist the cord as this may cause the machine to malfunction.
Features & Specifi cations
Vibration Type:
Oscillation & Spiral/Orbital
Motor Power:
200 W & 200 W DC
Oscillation Amplitude:
0–8 mm
Oscillation Frequency:
5–15 Hz
Spiral Amplitude:
0–2 mm
Spiral Frequency:
15–40 Hz
Control Panel:
LCD Screen on Base with Separate Remote Control
Speed Range:
0–60
User Weight Capacity:
265 lbs
Unit Weight:
67 lbs
Unit Size:
L 22 in. x W 21.6 in. x H 42.5 in.
Input Voltage:
AC 110–120 V/60 Hz
Certifi cation:
CE, ISO, ROS, Issued by SGS
