3
Fixturlaser EVO
Set Up
1.
Turn on the EVO Display Unit.
2.
Mount the ‘S’ sensor on the stationary shaft or
coupling hub and hand tighten the nut. Turn the
sensor on by pressing the power button on the
Bluetooth module.
3.
Mount the ‘M’ sensor on the movable shaft or
coupling hub and hand tighten the nut. Turn the
sensor on by pressing the power button on the
Bluetooth module.
Start the Horizontal Alignment Program
1.
From the main menu on the display
unit touch the horizontal alignment icon.
2.
The lasers will turn on and the screen graphic
will show the orientation of the sensors.
Aim the Lasers
1.
Loosen the green clips and slide the sensors up
or down until the line laser beams hit the middle
of the opposite sensor. Note that the sensors will
be at different elevations.
2.
The display unit screen will show values in the
black boxes in the upper left and right corners of
the screen when the lasers have been acquired by
the sensors. (see pg 4 for screenshot)
S E T U P
