Warning
When you lubricate the walking belt, you need
to turn off the walking machine. Then unplug the power
cord from the power socket.
Add Lubricant
The running board and walking belt of
have been pre-coated with lubricating silicone oil.
The friction between the running board and the walking
belt has a great influence on the service life and
performance of the walking machine, so it is necessary
to apply lubricating oil regularly. Apply about 20 grams
each time and be sure to apply evenly.
We recommend that the running board and the walking
belt of the walking machine be lubricated with silicone
oil (for reference only) as follows:
Once every 6 months for users with less use times
(less than 3 hours per week) ;
Once every 3 months for users with moderate
use times(3-5 hours per week);
O
nce every month for users with frequently
use times(more than 5 hours per week);
MINI WALK 3
Lubrication step
1
.
Lift the walking machine from the side and tilt it
at an angle of 45 degrees.
2
.
Open the walking belt by hand, pour the lubricating
silicone oil on the front, middle and back of the running
board, let the lubricating silicone oil flow down to the
other side of the walking belt until it flows to exceed
the middle of the running board, and then lay flat the
machine. Repeat this step to lubricate the other side
of walking belt and running board.
Warning
Be sure to unplug the machine's power cord
of walking machine before cleaning or maintaining
the product.
Use a cloth to clean the surface of the product.
Comprehensive cleaning will extend the life
of the walking machine.
Remove dust regularly to keep parts clean. Sweep
the exposed parts of walking belt both sides, this
will reduce the accumulation of impurities under the
walking belt. Keep the sneakers clean, avoid carrying
foreign objects into the walking belt, so as to avoid
wearing the walking belt and running board.
The surface of the walking belt must be wiped with
a damp cloth dampened with soap. Be careful not to
spill water under the electrical components and the
walking belt.
Note: Do not damage the electrical components
or break the control line.
Storage
When not in use, please store the product in a safe,
dry, ventilated and cool place.
Do not twist the power cord.
Avoid sharp objects scratching the surface of the
product.
Do not place the product under direct sunlight or
high temperatures.
Cleaning
Walking belt
Silicone oil bottle
Running board
Silicone oil
3
.
After finishing the lubrication step, and starting
up, walk slowly for a few minutes to ensure that the
walking belt and the running board fully absorb the
lubricating silicone oil before starting to increase the
speed.
Running board
28
