The following actions will not wake up MINI
WALK 3
Wake up action error: The foot should be in the
same direction as a step on the
. If
the foot is perpendicularc to the direction of motion,
the wake up fails.
Wake-up time error: Use the sole of the foot to
continuously touch the walking belt with a constant
speed. The wake-up fails if the interval between
every two touches exceeds 5 seconds.
MINI WALK 3
Press any function button on the handrail, then the
parameters of the display window illuminates, the
button light turns on and
wakes up.
Raise your foot and continuously touch the walking
belt at a constant speed. It takes three taps to wake up
the
. The time between two touches can
be no more than 5 seconds as shown in the figure:
MINI WALK 3
MINI WALK 3
Wake up operation
If you do not use
function button or
walk on the walking belt, the system enters Sleep mode
after the standby time exceeds 5 minutes, and the
display window shows:
MINI WALK 3
Sleep
Sleep and wake up
After MINI WALK 3 is powered on, if you do not use
the function buttons for a long time or walk on the
walking belt,
automatically enters
Sleep mode. If you need to continue using it, you can
wake up
by pressing the function buttons
or touching the walking belt with the sole of your foot.
MINI WALK 3
MINI WALK 3
After correctly tapping the walking belt three times,
the display window lights up the parameters, the
handrail button light is on, and
is
awake.
MINI WALK 3
25
There are two ways to wake up
:
MINI WALK 3
During the wake-up process, the middle area of the
display will change with the number of touches, as
shown below:
First it looks like:
Third it looks like:
Second it looks like:
