Maintenance
-Use a slightly-wet cotton cloth for cleaning.
-In case of malfunction or damage, please contact the retailer who sold the lamp.
ASSEMBLY INSTRUCTIONS
6
7
4
C
G
E
F
D
E
H
5
D
B
A
8
4.
Connect to the mains:
Step 1: Remove the 4 screws from the wiring box and open up
the cover (D).
Second: Loosen the cable gland (E) in order to insert the cable
(C) into the wiring box.
Third: Make the electrical connection, phase+neutral in the box
(F) and grounding to the terminal (G).
IMPORTANT: This model is ready for direct connection to an IP
65-class power point. The cable used must be H05 RN-F
<HAR> or better rubber, between 7 and 12mm in diameter.
5.
After making all the connections, tighten up the cable gland
(E) firmly once more. You are advised to seal where the mains
power cable enters the box as shown in the drawing, using the
syringe of thermal silicon grease supplied (H).
6.
Fit the cover (D) with the 4 screws and remember to tighten
the cable gland to ensure it is sealed.
7.
Insert the closed connection box and adjust the cables inside
the part (B).
8.
Fix in place using the three screws (A).