SLICK6SQC
Tweeter Installation Guidelines
Surface Mount Installation
The tweeter can either be fitted flush or surface mount.
Try and take into account the following when locating a suitable position.
For optimum staging try and locate a position that is higher than the woofer but within
twelve inches (maximum) of it.
It is vital that the tweeter is adjusted so that it is focused towards the listener.
After finding a suitable position for the tweeters, place the base of the tweeter casing in
the correct position.
Using the base, mark a hole for the wire to pass through.
Cut out this hole using an 8mm drill for the cable and ensure that the hole cut for the
cable is big enough and will not cause the cable to become chaffed in any way.
Pass the tweeter cable through the bottom of the base and through the previously drilled
hole.
5
Autogoods “130”
130.com.ua
