Vibe SLICK 10-V3, Instruction Manual

Page: 9 / 13

8
ENCLOSURE VOLUME (CONTINUED)
If we require a volume of 2.5cuft then we multiply this by 172 2.5
[
172 20 cubic inches.
:
e now take 2 known enclosure dimensions that we will use, e.g height and width and divide this
¿
gure
by them which will give us the depth, for e
[
ample our height is 15
´
, our width is 20
´
.
6
o our depth is 1 .
´
for this enclosure.
Note : this formula is for the INTE
5
NA
/
dimensions, please add the thickness of the material used to
construct the enclosure to the formula to give you the outside dimensions.
6
o assuming we are using one inch material we need to add two thicknesses to each internal
dimension to allow for material top and bottom, so the e
[
ternal dimensions for this enclosure would be
17
[
22
[
1 . inches.
The displacement of the woofer and the displacement of the port must also be added to the required
volume before you calculate the required si
]
es needed to build your enclosure.
Note :
When using a port you must leave a gap at least equal to the shortest measurement of the port
between the rear of the enclosure and the port.
6
o for a
´
port there must be at least a
´
gap between the port and the rear of the enclosure.
Autogoods “130”
130.com.ua