Vibe SLICK 10-V3, Instruction Manual

Page: 8 / 13

7
ENCLOSURE CONSTRUCTION
BRACING RECOMMENDATIONS
ENCLOSURE VOLUME
Use at least / inch
0'
F (medium density
¿
breboard) or birch ply to construct your enclosure and at
least 1 inch is recommended for the baf
À
e. It is recommend that the panels are glued, screwed and
braced with sections of the same material you have used to build the enclosure from. The VIBE
6/
IC
.
subwoofer is capable of producing internal pressures that can literally blow apart badly made
enclosures, so great care needs to be taken with the construction and bracing of your enclosure.
It is also worth sealing the joints with a silicone sealer once the glue has dried to make a perfect airtight
seal.
NOTE-
'
o not screw the
6
ubwoofer into the enclosure within 2 hours of applying silicone sealer to the
joints.
The gases given off as the silicone cures can perish the surround of the subwoofer causing a non
warranty failure.
To calculate the volume required for your enclosure please refer to recommended enclosure volumes
speci
¿
ed for your subwoofer. These are listed in cubic feet. To convert cubic feet to litres multiply the
cubic feet by 2 . . If you use this formula calculating your enclosure si
]
e will be easy .1 cubic foot is
e
[
pressed as 12
´ [
12
´ [
12
´
172 cubic inches
Good Better Best
Autogoods “130”
130.com.ua