6
23
3
17
www.viavito.com
R
Adjustments
This section explains how to adjust the power tower. See the CONDITIONING GUIDELINES
on page 18 for important information about how to get the most benefit from your
exercise program.
Make sure all parts are properly tightened each time the power tower is used. Replace
any worn parts immediately. The power tower can be cleaned with a damp cloth and a
mild, non-abrasive detergent. Do not use solvents.
ADJUSTING THE DIP ARM
To adjust the Dip Arm (6) to the up or
down position, remove the Pin (23). Move
the Dip Arm to the new position and
reinsert the Pin in to the Arm. Note: The
Pin must be inserted into the Dip Arm and
Upright (3) when the Dip Arm is in the up
position, as shown in the drawing. The Pin
will be behind the Upright when the Dip
Arm is in the down position.
